The Method Of Using Sigma Instruments

According to Waleed Alabsi, the Sigma Instrument is considered a revolutionary technology that is used to measure accurately spine fixation and treat health disturbances that are related to the spine ad the nervous system. 

According to Waleed Alabsi, the Sigma Instrument is considered a revolutionary technology that is used to measure accurately spine fixation and treat health disturbances that are related to the spine ad the nervous system.  The instrument sends a signal into the vertebrae to check motion and is reflected in a piezoelectric crystal that measures the force and transmits that information to the computer for interpretation.

By using Sigma Instruments, Sigma Chiropractic Are equipped to provide advanced chiropractic care. This tool is an advanced chiropractic technology for both spinal adjustment and spinal analysis. Software embedded in the Sigma Instrument is used to drive this system helping to comfortably and accurately locate and treat spinal injuries.

The Echo Effect:

While in a seated position, with your spine supported comfortably, the Sigma Instruments gently taps on each of the vertebrae. The echo of each tap is sensed by the computer. A wave pattern that is relatively short and flat is preferred over a tall sharp-angled wave. Each tap shows your body changes with the tapping being stopped when maximum stress reduction of each vertebral joint is achieved. The improved function and nervous system integrity resulting from this exercise involve your body’s healing mechanism.

How does the Sigma Instrument work?

To understand fully how Sigma Instrument works, Waleed Alabsi analyses what we call palpation. Through palpation, a chiropractor can check for joint fluidity, motion, and or rigidity. Subluxation refers to an improper motion that affects nerve function. The Sigma System can determine if the spine’s motion is too rigid or too fluid. A spine that is too rigid is said to be hypo-mobile. The computer utilizes precise levels of motion to determine what areas of the vertebrae are hypermobile or hypermobile. The Sigma Instrument can determine a problem faster and more accurately compared to manual procedures.

How does the Sigma Instrument make spinal changes?

The Sigma Instrument makes use of a precise oscillating force using an uninterrupted motion as demonstrated by Waleed Alabsi. This can increase the mobility of the spine by stimulating motion in the affected area. The Sigma Instrument stimulates motion on the affected area by tapping on it using soft tips that do not cause damage and are comfortable to the human body.

What Should I Expect to Feel?

When the Sigma Instruments are placed on the injured vertebrae in the spine, an impulse is introduced into the spine by a computer sensor. The patient feels a light click once this is done. The response from this process is reflected instantaneously to a piezoelectric crystal and sent to the computer for interpretation. This information gives the doctor a look into the characteristics of the vertebrae and tissues. Afterward, the doctor will use these observations to come up with the most appropriate treatment.

Treatment is conducted by use of the same sensor head that was used for assessment. During treatment, the doctor applies the instrument over the injured vertebrae. A light tapping sensation is felt for several seconds until the response desired is achieved. The treatment is completed automatically once the patient’s tissues have responded.

What Makes the Sigma Instrument Better Compared to Other Approaches?

According to Waleed Alabsi, a problem area is identified faster and more precisely by the Sigma Instrument than through manual procedures. Through the use of space-age technology, Sigma Chiropractic can determine if each vertebra of the spine is in alignment to ensure that the nervous system is free to transport nerve impulses throughout the body. This same technology is utilized by engineers to determine weakness and stress in the walls of a spacecraft.

How Can the Sigma Instrument Be So Gentle?

Waleed Alabsi says that the Sigma System makes use of a precise oscillating force coupled with uninterrupted motion. It can increase the mobility of the spine segments through the elimination of fixations.

Sigma instruments prove to be very effective for chiropractic treatment since they provide a clear plan of the adjustments, eliminating the need for the manual adjustment technique. Read on to know more.

Sigma instruments have improved the traditional chiropractic treatment, making it faster and more effective for spinal adjustments. Physiotherapists also use sigma instruments for their treatments, but the contributions of these devices in chiropractic treatment are huge. Here, we have discussed how these computerized devices help chiropractors. Mr Waleed Alabsi is the best person to contact if your facility needs sigma instruments. He is the founder of the Alabsi Group that connects businesses across the globes.

Sigma instruments help chiropractors on both analysis and treatment purposes, assessing them to find out the problem-causing area faster for conducting the treatment.

The analytic software in sigma allows chiropractors to measure different parts of your spine objectively. The device has not been used in the analysis of chiropractic treatment but also used in the treatment itself. It uses percussion instruments with different frequencies. So, chiropractors can optimize the treatment according to the requirement.

How chiropractors operate the instruments:

When the instrument is in the analysis mode, chiropractors check the flexibility of the joints and the vertebrae column. They will get a clear view of which articulation gets stiffed. When the analysis process is over, doctors plan the right treatment for your health.

Chiropractors choose software tools with different percussion frequencies for the treatment. Through the gentle tapping on the affected area, doctors perform the adjustments.

How it is different from conventional chiropractic treatment:

Chiropractors with the instruments find out the problem more easily since the computer-assisted method analyzes the problem faster. They perform adjustments using the instruments with controlled force. But, conventional adjustments completely depend on the manual adjustment process, using the hands only. So, manual adjustments include guessing work for finding the problem area, and the thrust is also done by hand movements. The manual adjustments are comparatively painful, causing cracking and popping sounds during the adjustment options.

It is an approved device by healthcare organizations. So, anyone who needs the instruments can acquire and use them. Buy the instruments from a trusted place that ensures the right standard of quality. Many companies offer the instruments, but choosing the best name is a difficult one. You can visit our website to get complete details of the instruments. We do not hide anything from you, giving every detail regarding the sigma devices.

Sigma instruments can be used for both spinal adjustments and extremity treatment. Experienced chiropractors find great relief using the instrument. If you want to learn more about the functions and the benefits of using the instruments, you can contact the Alabsi Group, led by Mr.Waleed Alabsi.

If you want to know why chiropractors use sigma instruments, we have the best answers which define every advantage of the instrument in the chiropractic field. Read on to know more.

Sigma instruments are revolutionary discoveries in chiropractic treatment that make spinal analysis and spinal adjustment perfect and easier. The technology helps doctors get in-depth knowledge about the problem-causing areas in your body.  With these instruments, doctors can precisely measure the location of the spine and can treat disturbances related to your spine and the nervous system. Mr.Waleed Alabsi will help you get the best quality instruments for treatment. he is the founder of the Alabsi Group that helps businesses across the globe.

How does the instrument perform?

The instrument provides a clear image of the spinal condition. The first thing in the process is to send information to the vertebrae to analyze the motion, and then it is reflected in the piezoelectric crystal, where the force is measured and sent to the computer for further analysis.

Sigma instruments make the treatment easier because chiropractors can ultimately pinpoint the area and find out the real problems easily. They can also plan gentle adjustments to enhance the treatment approaches.

What will be your feeling?

When the chiropractors place instruments on your spine, you feel perceptible impulse on your vertebrae. The instrument uses a computer sensor. You will feel a slight click when the treatment is conducted. The response is reflected in the piezoelectric crystal, and the data is sent back to the computer for analysis. These details will provide valuable information regarding the vertebrae conditions of the spine that help chiropractors perform the best treatment to solve the communication.

During the treatment:

The instrument has the sensor head with which chiropractors analyze the spinal condition. The same sensor head has been used for the treatment also. When chiropractors put the instrument on your spine, you will feel a tapping sensation that will continue for a few seconds until the desired response get achieved. When your tissue starts responsible, the computer will end the treatment automatically.

What is behind its popularity?

With the instruments, chiropractors can analyze and isolate the problem area faster. Manual adjustment takes too much time, but sigma instruments eliminate the delay and offer the best treatment for your health. If the spine is aligned properly, your nervous system also works well. You will feel better. Besides everything, patients can feel more relaxed when it comes to the treatment with sigma instruments. They will not hear any popping and cracking sounds, and the instruments make a very gentle force bearable by your body.

Since the instruments use oscillating force in an uninterrupted motion, it increases the mobility of your spinal segments. It uses soft tips and makes the chiropractic adjustments gentle and effective.

To get more details about the sigma instruments, please visit us. We have covered everything to make you understand chiropractic treatment. Mr.Waleed Alabsi works dedicatedly to enhance the health care fields. You will get every piece of medical equipment under the Alabsi Group.

Other Medical Services